Keywords:

bricking machine,kiln relining refractory brick lining machine,bricking rig,brick lining machine,brick laying machine

    Company Name:Shandong Haide
    Sales Manager: Ms.Jenny
    Address: Binzhou Boxing, Shandong Province
    International Dept.: 0086-533-3589167
    Fax: 0086-543-2413287
    E-mail: sales@brickingmachine.com

    HOME 涓婚〉 » SERVICE » How to operate the Arch Furnace Machine in Rotary Kiln

    How to operate the Arch Furnace Machine in Rotary Kiln

    2017-11-13 |
    Keywords:

    How to operate the Arch Furnace Machine in Rotary Kiln

    1銆丗irst of all ,connect to gas source, begin to work when the air pressure gets to rated pressure (0.4-0.6 MPa) .
    2銆丗ollowed by , push the fire-proof brick to top place, vacate the seam part at the middle where fire-proof brick should be withstand with seam Jack from interior to both sides , confirm that has got to request (hydraulic table instructions 30 MPa), followed by , move the block take-off and landing switch on the arc frame, so that the top block can be all reset under the effect of pneumatic pressure.
    3銆両n the course of laying, should move arc pulley so that the behind block have a same location with the original pushed fire-proof brick, at this time, move the block take-off and landing linked switch on behind both sides, so that the block after both sides on arc frame withstand fire-proof brick, after confirming the block on behind both sides all pushed to top place, release the pressure relief switch on pneumatic hydraulic pump, take down the seam Jack, vacate a position, and then lay and reinforce with the five middle pneumatic pump on the arc frame . asthis.net

    After confirming the fire-proof brick pushed to the top place has been reinforced, move the block take-off and landing linked switch so that the block on the arc frame can be all reset under the effect of pneumatic pressure. In the above work, the work in front by the second note cycle can be.

    4銆乀he equipment should be adjusted according to the kiln diameter, the flexible length of inclined leg can be adjusted in longitude and of the beam can be adjusted in latitude. Arc diameter can be adjusted according to the adjustable bolt parts. The data details are on debugging graph.

    5銆丳neumatic hydraulic pump pressure of work is 15 ~ 30 MPa

     

    HAIDE offers the Bricking Machine for variable diameter & no changed diameter rotary kiln. Just offer us the Kiln net diameter & refractory brick size, we will offer you the professional & favorite machine for your project!

     

    Haide Machine Co.,Ltd. UWA

    Professional manufacturer of Bricking Rig / Brick Lining Machine for Rotary Kiln Cement factory refractory construction

    URL: www.brickingmachine.com

    Email: sales@brickingmachine.com

    Mob/WhatsApp: +86 189 0643 2821

    Products*
    Name *
    Phone No. *
    Subject
    E-Mail *
    Message *
    * Required
    News
    Products
    • Top-Bar Parts
      Top-Bar Parts
    • Brick Cutting Machin
      Brick Cutting Machin
    • Brick Cutting Machin
      Brick Cutting Machin
    • Bricking Machine QZJ
      Bricking Machine QZJ
    • Bricking Machine QZJ
      Bricking Machine QZJ
    • Bricking Machine QZJ
      Bricking Machine QZJ