Keywords:

bricking machine,kiln relining refractory brick lining machine,bricking rig,brick lining machine,brick laying machine

    Company Name:Shandong Haide
    Sales Manager: Ms.Jenny
    Address: Binzhou Boxing, Shandong Province
    International Dept.: 0086-533-3589167
    Fax: 0086-543-2413287
    E-mail: sales@brickingmachine.com

    HOME 主页 » NEWS » Zinc Oxide rotary kiln brick kiln operation steps

    Zinc Oxide rotary kiln brick kiln operation steps

    2018-01-04 | Hits:
    Keywords:

    Zinc Oxide rotary kiln brick kiln operation steps

    In the Zinc Oxide brick kiln preheater cyclone when the conical surface and the straight tube part of the brick some more convenient. As the content of calcium carbonate in the raw material is reduced, and the mineralization of gypsum in the raw meal composition is added, the heat saving can be guaranteed. In the industrial test, it is known that the production of rotary hard cement clinker, especially the rotary kiln, has been greatly improved, and the fuel consumption has also been reduced. The brick is mainly divided into three parts, namely, ceiling and straight tube. The working temperature and load of the refractory in the preheater are lower than those in the rotary kiln, and are usually seldom damaged. When the construction of the preheater can be carried out on refractory brick masonry, brick masonry is from bottom to top, the outer wall of the cyclone are leaving some holes for laying with scaffolding. asthis.net

    Select suitable air volume and wind pressure. The ventilation volume of Zinc Oxide rotary kiln should not be too large, the excess air coefficient in the kiln should be taken generally, and the wind pressure should be more appropriate. The blanking speed of Zinc Oxide should be coordinated with the air pressure, the air volume and the length of the calcining band, and the material should be timely laid off and the necessary adjustment should be made at any time according to the kiln condition and the kiln sealing operation should be carried out properly. If the operation of Zinc Oxide kiln must be suspended in special circumstances, the heat preservation work of cooling kiln and sealing kiln should be done. When the kiln needs to be sealed, the ratio of coal to stone should be reduced several days ahead of time, so that the kiln temperature will gradually fall below the temperature of the material nodulation.

    arch furnace machine, cement industry, brick inline machine,bricking rig asthis.net

    HAIDE offer all different types of the Bricking Machine for variable diameter & no changed diameter rotary kiln. Just offer us the Kiln net diameter & refractory brick size, we will offer you the professional & favorite machine for your project!

     

    HAIDE offers the Bricking Machine for variable diameter & no changed diameter rotary kiln. Just offer us the Kiln net diameter & refractory brick size, we will offer you the professional & favorite machine for your project!

    Haide Machine Co.,Ltd.

    Professional manufacturer of Bricking Rig / Brick Lining Machine for Rotary Kiln Cement factory refractory construction

    URL: www.brickingmachine.com

    Email: sales@brickingmachine.com UWA

    Mob/WhatsApp: +86 189 0643 2821

    Products*
    Name *
    Phone No. *
    Subject
    E-Mail *
    Message *
    * Required
    News
    Products
    • Top-Bar Parts
      Top-Bar Parts
    • Brick Cutting Machin
      Brick Cutting Machin
    • Brick Cutting Machin
      Brick Cutting Machin
    • Bricking Machine QZJ
      Bricking Machine QZJ
    • Bricking Machine QZJ
      Bricking Machine QZJ
    • Bricking Machine QZJ
      Bricking Machine QZJ